#
# Name:    Makehead.win32
#
# Purpose: This file is used to customize operating system and installation
#          dependent features of the MX makefiles.  This version is customized
#          for Microsoft Win32 (Windows 95/98/NT 4).
#
# Normally, the only things that end users may have to modify in this file are
# the definitions of INCLUDES, LIB_DIRS, and LIBRARIES.
#

#INCLUDES  = $(MX_INCLUDES)

# INCLUDES = $(MX_INCLUDES) $(EPICS_INCLUDES)
INCLUDES = $(MX_INCLUDES) $(XIA_HANDEL_INCLUDES)

#LIBRARIES = $(WIN32_LIBS)

# LIBRARIES = $(WIN32_LIBS) $(EPICS_LIBS)
# LIBRARIES = $(WIN32_LIBS) $(UMCBI_LIBS)
LIBRARIES = $(WIN32_LIBS) $(XIA_HANDEL_LIBS)

#
# You may also need to modify some of the following definitions, depending
# on the drivers you plan to use.
#

#
# You must specify the directory that Microsoft Visual C++ was installed in.
# Usually this is c:\progra~1\micros~1\vc98. The name specified for Gnu Make
# MUST NOT contain any spaces in it.  That is why the example below specified
# the progra~1\micros~1 directory.
#
MSDEV_DIR	= c:\\progra~1\\micros~1\\vc98
#MSDEV_DIR	= c:\\progra~1\\micros~2\\vc98
#MSDEV_DIR	= c:\\progra~1\\devstudio\\vc
#MSDEV_DIR	= c:\\msdev
#MSDEV_DIR	= c:\\progra~1\\micros~3
#
WIN32_LIBS	= $(MSDEV_DIR)\\lib\\wsock32.lib $(MSDEV_DIR)\\lib\\winmm.lib \
        $(MSDEV_DIR)\\lib\\advapi32.lib

EXTRA_LIB_OBJS	= ..\\tools\\xdr.obj \
		$(XIA_HANDEL_SRC)\\handel.obj \
		$(XIA_HANDEL_SRC)\\handel_detchan.obj \
		$(XIA_HANDEL_SRC)\\handel_dyn_default.obj \
		$(XIA_HANDEL_SRC)\\handel_dyn_detector.obj \
		$(XIA_HANDEL_SRC)\\handel_dyn_firmware.obj \
		$(XIA_HANDEL_SRC)\\handel_dyn_module.obj \
		$(XIA_HANDEL_SRC)\\handel_file.obj \
		$(XIA_HANDEL_SRC)\\handel_memdbg_win32.obj \
		$(XIA_HANDEL_SRC)\\handel_run_control.obj \
		$(XIA_HANDEL_SRC)\\handel_run_params.obj \
		$(XIA_HANDEL_SRC)\\handel_sort.obj \
		$(XIA_HANDEL_SRC)\\handel_system.obj \
		$(XIA_HANDEL_SRC)\\handel_test.obj \
		$(XIA_HANDEL_SRC)\\handel_xerxes.obj \
		$(XIA_HANDEL_SRC)\\fdd.obj \
		$(XIA_HANDEL_SRC)\\psl.obj \
		$(XIA_HANDEL_SRC)\\xia_assert.obj \
		$(XIA_HANDEL_SRC)\\xerxes.obj \
		$(XIA_HANDEL_SRC)\\xerxes_test.obj \
		$(XIA_HANDEL_SRC)\\x10p.obj \
		$(XIA_HANDEL_SRC)\\x10p_psl.obj \
		$(XIA_HANDEL_SRC)\\md_log.obj \
		$(XIA_HANDEL_SRC)\\md_win95.obj \
		$(XIA_HANDEL_SRC)\\epplib.obj \

EXTRA_OBJS	= ..\\tools\\getopt.obj
#
# Directory containing the EG&G Ortec UMCBI library and include file.
#

UMCBI_DIR	= c:\\Users\\Lavender\\ortec
UMCBI_INCLUDES	= -I$(UMCBI_DIR)
UMCBI_LIBS	= $(UMCBI_DIR)\\Mcbcio32.lib

#
# Directory tree containing compiled versions of the XIA Handel libraries
# and include files.
#
# Tested with Handel 0.3.0 (Sept. 2003)
#
#XIA_HANDEL_DIR      = c:\\progra~1\\xia\\handel
XIA_HANDEL_DIR      = c:\\progra~1\\xia\\handel_src
XIA_HANDEL_SRC = $(XIA_HANDEL_DIR)\\src
XIA_HANDEL_INCLUDES = -I$(XIA_HANDEL_DIR)\\inc -DIS_MX_DRIVER
XIA_HANDEL_LIB_DIR  = $(XIA_HANDEL_DIR)\\lib
#XIA_HANDEL_LIBS     = $(XIA_HANDEL_LIB_DIR)\\handel.lib \
#			$(XIA_HANDEL_LIB_DIR)\\xerxes.lib \
#			$(XIA_HANDEL_LIB_DIR)\\md.lib
XIA_HANDEL_LIBS = $(DRIVERLINX_LIBS)

#
# DriverLINX NT Port I/O driver.
#

DRIVERLINX_DIR      = c:\\progra~1\\DLPortIO
DRIVERLINX_INCLUDES = -I$(DRIVERLINX_DIR)\\API
DRIVERLINX_LIBS     = $(DRIVERLINX_DIR)\\API\\DLPORTIO.lib

#
# Directory containing the National Instruments pcMotion32 DLL for the
# ValueMotion series of motor controllers.
#

PCMOTION32_DIR      = c:\\nuLogic\\pcMotion
PCMOTION32_INCLUDES = -I$(PCMOTION32_DIR)\\SUPPORT
PCMOTION32_LIBS     = $(PCMOTION32_DIR)\\SUPPORT\\Microsoft\\pcmotionMS.lib

#
# EPICS includes and libraries.
#
EPICS_ARCH	= WIN32
EPICS_TOP	= c:\\users\\lavender\\epics\\R3.13.1
EPICS_INCLUDES	= -I$(EPICS_TOP)\\base\\include
EPICS_LIBS	= $(EPICS_TOP)\\base\\lib\\$(EPICS_ARCH)\\ca.lib \
			$(EPICS_TOP)\\base\\lib\\$(EPICS_ARCH)\\Com.lib

#
#========================================================================
#
# Generally, you should not have to modify anything after this point.
#

# Intel x86 with Microsoft Visual C++ under Win32.
#

.SUFFIXES:
.SUFFIXES: .c .obj

.c.obj:
	$(CC) -c $(CFLAGS) $<

CC		= cl
#CFLAGS		= -nologo $(INCLUDES) \
#			-MD -Zi -WX -DOS_WIN32 $(EXTRA_FLAGS) -DDEBUG
CFLAGS		= -nologo $(INCLUDES) \
			-MTd -Zi -WX -DOS_WIN32 $(EXTRA_FLAGS) -DDEBUG
CFLAGS_EPICS	= $(CFLAGS)

# Special cases for individual files.

CFLAGS_MX_EPICS = $(CFLAGS_EPICS)

CFLAGS_MX_VERS  = $(CFLAGS) -DMX_MAJOR_VERSION=$(MX_MAJOR_VERSION) \
			-DMX_MINOR_VERSION=$(MX_MINOR_VERSION) \
			-DMX_UPDATE_VERSION=$(MX_UPDATE_VERSION)

COMPILE		= $(CC) -c
DEFINE		= -D
#
# I use a version of makedepend that I obtained from the web site
# http://www.utexas.edu/ftp/microlib/nt/new/
#
# Disabled for now.
#
#MAKEDEPEND	= mkdepend -f- $(CFLAGS) $(EPICS_INCLUDES) *.c > Makefile.depend

#MAKEDEPEND	= cp nul Makefile.depend

MAKEDEPEND	= ( rm Makefile.depend ; touch Makefile.depend )

MAKEDEPEND_CLEAN = ( rm Makefile.depend ; touch Makefile.depend )

#
#---------------------------------------------------
#
# See libMx/Makehead.irix for why this is here.
#
MX_LIB_OBJS       = $(MX_LIB_SRCS:.c=.$(OBJ))
MOTOR_OBJS        = $(MOTOR_SRCS:.c=.$(OBJ))
SERVER_OBJS       = $(SERVER_SRCS:.c=.$(OBJ))
UPDATE_OBJS       = $(UPDATE_SRCS:.c=.$(OBJ))
MXDRIVERINFO_OBJS = $(MXDRIVERINFO_SRCS:.c=.$(OBJ))

#
#---------------------------------------------------
#

RM		= rm
MAKE		= make

OBJ		= obj

#
MX_LIB_DIR	= ..\\libMx
MX_INC_DIR	= $(MX_LIB_DIR)
MX_INCLUDES	= -I$(MX_INC_DIR)

MX_LIBRARY_PATH	= $(MX_LIB_DIR)\\$(MX_LIBRARY_NAME)

MX_LIBRARY_NAME	= libMx.lib

MX_LIBRARY_DELETE = $(RM) libMx.*

$(MX_LIBRARY_NAME): $(MX_LIB_OBJS)
	-$(MX_LIBRARY_DELETE)
	link /dll /debug /out:libMx.dll /nodefaultlib:libc \
			$(MX_LIB_OBJS) $(EXTRA_LIB_OBJS) $(LIBRARIES)

library_install:
	-mkdir $(MX_INSTALL_DIR)/bin
	-mkdir $(MX_INSTALL_DIR)/etc
	-mkdir $(MX_INSTALL_DIR)/etc/startup
	-mkdir $(MX_INSTALL_DIR)/include
	-mkdir $(MX_INSTALL_DIR)/lib
	-mkdir $(MX_INSTALL_DIR)/log
	-mkdir $(MX_INSTALL_DIR)/run
	-mkdir $(MX_INSTALL_DIR)/sbin
	-mkdir $(MX_INSTALL_DIR)/state
	cp mx*.h $(MX_INSTALL_DIR)/include
	cp $(MX_LIBRARY_NAME) $(MX_INSTALL_DIR)/lib
	cp libMx.dll $(MX_INSTALL_DIR)/bin
	touch $(MX_INSTALL_DIR)/etc/motor.dat
	touch $(MX_INSTALL_DIR)/etc/scan.dat
	cp ../plotgnu/plotgnu.pl $(MX_INSTALL_DIR)/bin
	cp ../plotgnu/showdata $(MX_INSTALL_DIR)/bin/showdata.pl
	cp ../plotgnu/showplot $(MX_INSTALL_DIR)/bin/showplot.pl
	cp ../plotgnu/plot2ps $(MX_INSTALL_DIR)/bin/plot2ps.pl
	cp ../plotgnu/*.bat $(MX_INSTALL_DIR)/bin
	cp ../tools/*.exe $(MX_INSTALL_DIR)/bin
	cp ../tools/getopt.obj $(MX_INSTALL_DIR)/lib

#
#---------------------------------------------------
#
MOTOR_NAME	= motorbin.exe

$(MOTOR_NAME): $(MOTOR_OBJS) $(MX_LIBRARY_PATH)
	link /debug /out:motorbin.exe *.obj \
			/nodefaultlib:libc $(EXTRA_OBJS) \
			$(MX_LIBRARY_PATH) $(WIN32_LIBS)

motor_install:
	cp $(MOTOR_NAME) $(MX_INSTALL_DIR)/bin
	cp ../scripts/motor.bat $(MX_INSTALL_DIR)/bin

#
#---------------------------------------------------
#
SERVER_NAME	= mxserver.exe

$(SERVER_NAME): $(SERVER_OBJS) $(MX_LIBRARY_PATH)
	link /debug /out:mxserver.exe *.obj \
			/nodefaultlib:libc $(EXTRA_OBJS) \
			$(MX_LIBRARY_PATH) $(WIN32_LIBS)

server_install:
	cp $(SERVER_NAME) $(MX_INSTALL_DIR)/sbin
	cp ../scripts/startmxserver.bat $(MX_INSTALL_DIR)/sbin
	cp ../scripts/mx.bat $(MX_INSTALL_DIR)/sbin
	touch $(MX_INSTALL_DIR)/etc/mxserver.dat
	touch $(MX_INSTALL_DIR)/etc/mxserver.acl

#
#---------------------------------------------------
#
UPDATE_NAME	= mxupdate.exe

$(UPDATE_NAME): $(UPDATE_OBJS) $(MX_LIBRARY_PATH)
	link /debug /out:mxupdate.exe *.obj \
			/nodefaultlib:libc $(EXTRA_OBJS) \
			$(MX_LIBRARY_PATH) $(WIN32_LIBS)

update_install:
	cp $(UPDATE_NAME) $(MX_INSTALL_DIR)/sbin
	cp ../scripts/startmxupdate.bat $(MX_INSTALL_DIR)/sbin
	touch $(MX_INSTALL_DIR)/etc/mxupdate.dat

#
#---------------------------------------------------
#
MXDRIVERINFO_NAME    = mxdriverinfo.exe

$(MXDRIVERINFO_NAME): $(MXDRIVERINFO_OBJS) $(MX_LIBRARY_PATH)
	link /debug /out:mxdriverinfo.exe *.obj \
			/nodefaultlib:libc $(EXTRA_OBJS) \
			$(MX_LIBRARY_PATH) $(WIN32_LIBS)

mxdriverinfo_install:
	cp $(MXDRIVERINFO_NAME) $(MX_INSTALL_DIR)/bin